"नैनोप्रौद्योगिकी": अवतरणों में अंतर
Content deleted Content added
Sanjeev bot (वार्ता | योगदान) छो सन्दर्भ की स्थिति ठीक की। |
|||
पंक्ति 51:
=== आणविक नैनोतकनीकी: एक दीर्घकालीन परिप्रेक्ष्य ===
आणविक नैनोतकनीकी में, जिसे आणविक निर्माण भी कहते हैं, नैनो स्केल की मशीनों का उपयोग करके आणुविक पैमाने पर नैनो पधार्थों को बनाया जाता है। यह तकनीक सामान्य निर्माण तकनीकों से भिन्न है, जिनका प्रयोग कार्बन नैनोट्यूब्स या नैनोकणों के उत्पादन में होत है। इस तकनीक का आधार प्रकृति के अनन्त उदाहरणों में मिलता है। ड्रेक्स्लर और अन्य वैज्ञानिकों
डॉ एलेक्स ज़ेटल और उनके साथियों
== नैनोप्रौद्योगिकी का उपयोग ==
पंक्ति 59:
हालांकि नैनोतकनीकी के संभावित उपयोगों का बवंडर सा है, अधिकतर वाणिज्यिक उपयोग पहली पीढ़ी के निष्क्रिय पधार्थों का ही है। इनमे शामिल है [[टैटेनियम]] डाई आक्साइड का प्रयोग प्रसाधन सामग्रीओं में, [[चाँदी]] नैनो कण का प्रयोग खादपदार्थों के डिब्बाबंदी, कपडों, कीटाणुनाशकों और घरेलू यंत्रों में, [[जस्ता]] आक्साइड नैनो कण का प्रयोग प्रसाधन सामग्रीओं, रंगलेप (पेंट), बाहरी-फर्नीचर वार्निश; और [[सेरियम]] आक्साइड ईंधन-उत्प्रेरक के रूप में।<ref>[http://www.nanotechproject.org/44 नैनोतकनीकी उपभोक्ता उत्पाद सूची (अंग्रेजी)]</ref>
फिर भी, अभी अनुसंधान किये बिना अगले शिखर पर जाना संभव नही है। 'नैनो' शब्ध के मूल सिद्धातों को उत्पादन के स्तर तक ले जाने के लिये नैनो स्तर मे अणुओं का परिचालन पर अनुसंधान जारी है। किन्तु 'नैनो' शब्ध के तकनीकी उद्यमी और वैज्ञानिकों द्वारा दुरुपयोग एक प्रतिक्षेप को जन्म दे सकता है
<!--
== Current research ==
पंक्ति 108:
[[Image:AFMsetup.jpg|thumb|left|296px|Typical [[Atomic force microscope|AFM]] setup. A [[Microfabrication|microfabricated]] [[cantilever]] with a sharp tip is deflected by features on a sample surface, much like in a [[phonograph]] but on a much smaller scale. A [[laser]] beam reflects off the backside of the cantilever into a set of [[photodetector]]s, allowing the deflection to be measured and assembled into an image of the surface.]]
The first observations and size measurements of nano-particles was made during first decade of 20th century. They are mostly associated with the name of Zsigmondy who made detail study of gold sols and other nanomaterials with sizes down to 10 nm and less. He published a book in 1914.
There are traditional techniques developed during 20th century in [[Interface and Colloid Science]] for characterizing nanomaterials. These are widely used for ''first generation'' passive nanomaterials specified in the next section.
These methods include several different techniques for characterizing [[particle size distribution]]. This characterization is imperative because many materials that are expected to be nano-sized are actually aggregated in solutions. Some of methods are based on [[light scattering]]. Other apply [[ultrasound]], such as [[ultrasound attenuation spectroscopy]] for testing concentrated nano-dispersions and microemulsions
There is also a group of traditional techniques for characterizing [[surface charge]] or [[zeta potential]] of nano-particles in solutions. These information is required for proper system stabilzation, preventing its [[aggregation]] or [[flocculation]]. These methods include [[microelectrophoresis]], [[electrophoretic light scattering]] and [[electroacoustics]]. The last one, for instance [[colloid vibration current]] method is suitable for characterizing concentrated systems.
|