साँचा:Infobox mill building/doc

{{infobox mill building}} may be used to summarize information about a building. It can be used in two ways with named parameters or with ten unnamed parameters.

Usage

{{Infobox mill building
| name                 = 
| building_name        = 
| native_building_name = 
| alternate_names      = 
| image                = 
| caption              = 
| textile_type         = 
| power_source         = 
| mill-process         = 
| altitude             = 
| building_type        = 
| architectural_style  = 
| structural_system    = 
| cost                 = 
| employees            = 
<!-- For titles and maps-- geo info-->
| location            = 
| location_town       = 
| location_country    = 
| altitude            = 
| map_type            = 
| latitude            = 
| longitude           = 
| serving_canal       = 
| serving_railway     = 
| serving_river       = 
| owner               = 
| owner_2             = 
| acquisition_date_2  = 
| owner_3             = 
| acquisition_date_3  = 
| owner_4             = 
| acquisition_date_4  = 
| current_tenants     = 
| current_owner       = 
| coordinates         = 
| oscoor              = 
| start_date          = 
| completion_date     = 
| renovation_date     = 
| re-equipment_date_2 = 
| re-equipment_date_3 = 
| change_of_use_date  = 
| current_status      = 
| demolition_date     = 
| destruction_date    = 
<!-- Dimensions-->
| height              = 
| other_dimensions    = 
| floor_count         = 
| floor_area          = 
| floor_height        = 
| floor_usage         = 
| floor_construction  = 
<!-- The building team -->
| main_contractor     = 
| architect           = 
| architecture_firm   = 
| structural_engineer = 
| other_designers     = 
| awards              = 
| ren_architect       = 
| ren_firm            = 
| ren_oth_designers   = 
| ren_qty_surveyor    = 
| ren_awards          = 
<!-- Steam powered-->
| engine_date           = 
| engine_decommissioned = 
| engine_maker          = 
| engine_type           = 
| engine_valve          = 
| engine_throw          = 
| engine_rpm            = 
| engine_kWatt          = 
| engine_hp             = 
| engine_fly_diameter   = 
| transmission_type     = 
| no_of_ropes           = 
| boilers               = 
| boiler_temperature    = 
| psi                   = 
<!-- Watermills -->
| wheels                  = 
| diameter_of_water_wheel = 
| width_of_wheel          = 
| wheel_rpm               = 
<!-- Equipment-->
| equipment_maker   = 
| date_of_equipping = 
| no_of_looms       = 
| cotton_count      = 
| scutchers         = 
| carding_engines   = 
| doublers          = 
| kiers             = 
| other_equipment   = 
| mule_frames       = 
| ring_frames       = 
<!-- References-->
| embedded          = 
| references = 
}}

Parameters

Unnamed parameters

1. Mill name
2. Location
3. Coordinate
4. Reference
5. Notes- Description (not yet displayed)
6. Image
7. Architect/Owner (some lists use different info (not yet displayed)
8. Built
9. Decommissioned
10. Demolished

The purpose of this is to allow lists of mills to be constructed using the {{TMbegin}}, {{TMtr}}, {{TMend}} sequence. The {{TMtr}} can be copied directly across into a new article and renamed {{Infobox mill building}} as the unnamed parameters transfer directly across. The new Infobox can then be edited, and as new data is input it will over-ride potentially conflicting parameters. Similarly, any {{Infobox mill building}} named-parameters can safely be added to a {{TMtr}} call, as they will be safely ignored while on the list page- but will then be valid here if a copy is made.

The named parameters are seen in the section below.

Example

Regent Mill

Regent Mill in 1950
Cotton
Spinning (ring mill)
वास्तु शैली	Standing, usage changed
संरचना प्रणाली	Red engineering brick
स्थिति	Failsworth, Oldham
जल स्रोत	Rochdale Canal
रेल मार्ग	Oldham Loop Line
उत्तराधिकार	LCC (1930) Salton ()
निर्देशांक	SD789345 53°30′31″N 2°09′37″W
Construction
निर्मित	1906
नष्ट	Chimney 1964
तल संख्या	4
भूमि क्षेत्रफ़ल	345 फीट (105 मी॰) by 130 फीट (40 मी॰)
भूमि प्रयोग	In 1950: cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room. The first floor was the card room, The second floor was the ring frame room The third floor was the winding, warping and beaming room.
अन्य परिमाण	Chimney 210 फीट (64 मी॰)
अभिकल्पन दल
वास्तुकार	George Stott
Power
दिनाँक	1906
इंजन निर्माता	Buckley and Taylor of Oldham
डीकमीशण्ड	1958
इंजन प्रकार	marine type vertical triple expansion engine
सिलिण्डर व्यास एवं फ़ेंक क्षमता	63-inch diameter low-pressure cylinder
घूर्णन (चक्र प्रति मिनट)	64
स्थापित अश्व शक्ति	1800 ihp sometimes loaded to 2000 ihp
फ़्लाईव्हील व्यास	26 फीट (7.9 मी॰)
ट्राँस्मीशन प्रकार	rope
No. of ropes	26 ropes
Boiler configuration
बॉयलर	? Dual Lancashire ?
सन्दर्भ
Dunkerley, Philip. "Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth". अभिगमन तिथि 2009-01-09.

{{Infobox mill building
| building_name       = Regent Mill
| native_building_name= 
| alternate_names     =
| image               = Mill-image-pending.jpg
| caption             = Regent Mill in 1950 
| textile_type        = [[Cotton]]
| building_type       = [[Cotton-spinning machinery|Spinning (ring mill)]]
| power_source        = Steam
| architectural_style = 
| structural_system   = Red engineering brick
| cost                = 
| location            = [[Failsworth]], Oldham
| serving_canal       = [[Rochdale Canal]]
| serving_railway     = [[Oldham Loop Line]]
| owner               =
| owner_2             = LCC  
| acquisition_date_2  = 1930
| owner_3             = Salton
| acquisition_date_3  =
| owner_4             =
| acquisition_date_4  =
| current_tenants     = 
| coordinates         = {{coord|53.5087|-2.1604|display=inline|region:GB|format=dms}}
| oscoor              = SD 789345
| altitude            = 
| start_date          = 1906
| completion_date     = 
| change_of_use_date  = 1958
| renovation_date     = 
| demolition_date     = Chimney 1964
| current_status      = Standing, usage changed
| height              = 
| other_dimensions    = Chimney {{convert|210|ft|m}}
| floor_count         = 4
| floor_area          = {{convert|345|ft|m}} by {{convert|130|ft|m}}
| floor_height        = 
| floor_usage         = In 1950:
*cellar: a warehouse, yarn cellar, waste room, cotton room, and dust room. 
*The first floor was the card room, 
*The second floor was the ring frame room 
*The third | architecture_firm   =
| structural_engineer = 
| other_designers     = 
| awards              = 
| engine_date         = 1906
| engine_decommissioned  = 1958
| engine_maker        = [[Buckley and Taylor of Oldham]]
| engine_type         = marine type vertical triple expansion engine
| engine_valve        =
| engine_cylinder     = 63-inch diameter low-pressure cylinder
| engine_rpm          = 64
| engine_kWatt        =
| engine_ihp          = 1800 ihp sometimes loaded to 2000 ihp
| engine_fly_diameter = {{convert|26|ft|m}}
| transmission_type   = rope
| no_of_ropes         = 26 ropes
| boilers             = ? Dual Lancashire ?
| boiler_temperature  =
| psi                 =
| spindles            = 60000
| references          = {{cite web|url=http://dunkerley-tuson.co.uk/regentmill.aspx|title=Dunkerley-Tuson Family Website, The Regent Cotton Mill, Failsworth|last=Dunkerley|first=Philip|accessdate=2009-01-09}}
}}

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has an "established", "founded", "opened" or similar date, use {{start date}} unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• uid
• url
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.